RE: Building base EPICS 3.13.2 under KAI C++ compiler

[johill@lanl.gov (Jeff Hill)]

Vladimir,

If your compiler does not define one of the following 
( in base/src/ca/net_convert.h ) then you will need to
define an appropriate macro on the C compiler command 
line using your version of the build system configuration 
files. You will probably need "- D_M_IX86" or "-D_X86_".

Jeff

#if defined(VAX) 
#	define CA_FLOAT_MIT
#	define CA_LITTLE_ENDIAN
#elif defined(_M_IX86) || defined(_X86_)
#	define CA_FLOAT_IEEE
#	define CA_LITTLE_ENDIAN
#elif (defined(__ALPHA) && defined(VMS) || defined(__alpha)) && defined(VMS)
#	define CA_FLOAT_MIT
#	define CA_LITTLE_ENDIAN
#elif (defined(__ALPHA) && defined(UNIX) || defined(__alpha)) && defined(UNIX)
#	define CA_FLOAT_IEEE
#	define CA_LITTLE_ENDIAN
#else
#	define CA_FLOAT_IEEE
#	define CA_BIG_ENDIAN
#endif

> -----Original Message-----
> From: Vladimir Sirotenko [mailto:sirotenko@fnal.gov]
> Sent: Thursday, July 06, 2000 1:58 PM
> To: tech-talk@aps.anl.gov
> Subject: Building base EPICS 3.13.2 under KAI C++ compiler
> 
> 
> Hi,
> 
> I am building base EPICS (host) under KAI compiler KCC on Linux box
> and build  was ok with several warnings.
> Unfortunately, CA client does not work.
> When I run ca_test (with excas running)  I got the following:
> 
> <d0lxbld4> ca_test janet
> CAC: post_msg(): Corrupt cmd in UDP msg d00
> ../iocinf.c: bad UDP msg from d0lxbld4.fnal.gov:4526
> err resp  was "User specified timeout on IO operation expired"
> Not Found janet
> 
> At the same time with native gcc base EPICS build everything is ok on the
> same machine (!)
> and ca_test works ok and produces the right dump.
> 
> We are using :
> Red Hat Linux Release 5.2.1
> Kernel 2.2.12-20f1smp on an i686
> KCC, v3_3f_1
> gcc 2.7.2.3.f.1
> 
> Any hints where to look?
> 
> Vladimir
> 
> 
> 
> 
> 
> 
> 
>