EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  <2002>  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  <2002>  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>
Subject: IOC mesage at startup
From: john sinclair <[email protected]>
To: tech talk <[email protected]>
Date: Fri, 18 Jan 2002 11:53:06 -0500 (EST) 
Arch = x86
EPICS = R3.13.4
VxWorks = tornado 2

I am getting the following message around 10-20 seconds after an iocInit:

  Unable to contact CA repeater after 50 tries
  Silence this message by starting a CA repeater daemon

What does this mean?

Examining VxWorks tasks gives (among other things)

  CA_repeater3e65f04   3cd9650 181 PEND   14db1c  3cd94d8   0  0


Its seems that this message is a recent occurrence, but I don't think I
have made any system level changes recently.

John Sinclair
[email protected]
Oak Ridge National Lab
865-576-6362   865-574-1268 (fax)
Replies:
RE: IOC mesage at startup Jeff Hill
Navigate by Date:
Prev: how to handle periodic bad readings and alarms Geoff Savage
Next: RE: how to handle periodic bad readings and alarms Allison, Stephanie
Index: 1994  1995  1996  1997  1998  1999  2000  2001  <2002>  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: RE: how to handle periodic bad readings and alarms Allison, Stephanie
Next: RE: IOC mesage at startup Jeff Hill
Index: 1994  1995  1996  1997  1998  1999  2000  2001  <2002>  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024