Experimental Physics and Industrial Control System
Hello,
I'm testing the event generator EVG200, but my IOC failed to probing the
event-generator board. Could somebody give me some suggestions? Thank you
very much.
---------------------------------------------------------
EgConfigure(4,0x2000)
value = -1 = 0xffffffff = prsrv_cast_client + 0xff0f7b3f
ErConfigure(6,0x1800,164,5)
value = -1 = 0xffffffff = prsrv_cast_client + 0xff0f7b3f
cd "/home21/home/leige/epicsApp/dbd"
value = 0 = 0x0
dbLoadDatabase("baseApp.dbd")
devApsEg: Failure probing for event generator... Card disabled
devApsEr: Failure probing for event receiver... Card disabled
value = 0 = 0x0
dbLoadDatabase("evgevr.dbd")
value = 0 = 0x0
----------------------------------------------------------------
Best wishes,
Ge
- Replies:
- Re: Failure probing for event generator Dayle Kotturi
- References:
- Re: TRAPWRITE and logging CA_PUT activity Albert Kagarmanov
- Navigate by Date:
- Prev:
Error using Agilent E5810A LAN/GPIB Gateway Mark Wagner
- Next:
Re: Error using Agilent E5810A LAN/GPIB Gateway Benjamin Franksen
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
<2005>
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: TRAPWRITE and logging CA_PUT activity Albert Kagarmanov
- Next:
Re: Failure probing for event generator Dayle Kotturi
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
<2005>
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024