problem building 3.14.8.2 with win32-x86

["Dale L. Brewe" <brewe@aps.anl.gov>]

I'm having a bit of a problem building epics base 3.14.8.2 w/ the 
win32-x86 platform. The build progresses ok for awhile til I get 
output from gnumake (3.78.1 or 3.80) that ends w/

"Installing binary ../../../bin/win32-x86/Com.dll"
Usage:
         [ -m mode ] file ... directory

        -d             Create non-existing directories
        -m mode        Set the mode for the installed file (0755 by default)
        file           Name of file
        directory      Destination directory
Can't find file 'Com.dll*'
gnumake[3]: *** [../../../bin/win32-x86/Com.dll] Error 2
gnumake[3]: Leaving directory `D:/epics/base-3.14.8.2/src/libCom/O.win32-x86'
gnumake[2]: *** [install.win32-x86] Error 2
gnumake[2]: Leaving directory `D:/epics/base-3.14.8.2/src/libCom'
gnumake[1]: *** [libCom.install] Error 2
gnumake[1]: Leaving directory `D:/epics/base-3.14.8.2/src'
gnumake: *** [src.install] Error 2

I'm not sure I understand the reference to Com.dll* instead of 
Com.dll, but other than that I don't really know what might be wrong. 
Com.dll does exist in O.win32-x86. I'm using Visual C 6.0 and perl 
5.6.1 from ActiveState.com or 5.8.8 from perl.com. The only changes 
I've made to the downloaded epics distribution is to uncomment the 
configure/os/CONFIG_SITE.win32-x86.win32-x86 file as suggested for vc 
6 vs. .NET.

dale brewe

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 Dale L. Brewe
 PNC-CAT/Argonne National Laboratory

 ph: 630 252 0582         fax: 630 252 0580
 Mail:
 Argonne National Laboratory
 Bldg 435E sector 20
 9700 S. Cass Ave.
 Argonne, IL 60439
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~