Re: asynGpib:srqPoll srqStatus is 1 after ntrys 5 Why?

[Dirk Zimoch <dirk.zimoch@psi.ch>]

There is only one device on the bus. I didn't understand that the message means 
"some device does not release SRQ".

Eric Norum wrote:
> I think that means that there's something on the bus holding SRQ in the 
> asserted state.   Try removing devices one at a time and see if the 
> problem goes away -- then focus on the offending device.
>
> On Nov 13, 2007, at 4:20 AM, Dirk Zimoch wrote:
>
> > Hi all,
> >
> > I have a GPIB device that causes strange messages during IOC startup:
> >
> > iocInit
> > Starting iocInit
> > ############################################################################ 
> >
> > ###  EPICS IOC CORE built on Aug  2 2007
> > ###  EPICS R3.14.8.2 $R3-14-8-2$ $2006/01/06 15:55:13$
> > ############################################################################ 
> >
> > 2007/11/13 11:18:34.286 L0 asynGpib:srqPoll srqStatus is 1 after ntrys 
> > 5 Why?
> > 2007/11/13 11:18:34.392 L0 asynGpib:srqPoll srqStatus is 1 after ntrys 
> > 5 Why?
> > iocInit: All initialization complete
> >
> > What does that mean?
> >
> > Dirk
> >
> >
> > --Dr. Dirk Zimoch
> > Paul Scherrer Institut, WBGB/006
> > 5232 Villigen PSI, Switzerland
> > Phone +41 56 310 5182
>
> --Eric Norum <norume@aps.anl.gov>
> Advanced Photon Source
> Argonne National Laboratory
> (630) 252-4793

--
Dr. Dirk Zimoch
Paul Scherrer Institut, WBGB/006
5232 Villigen PSI, Switzerland
Phone +41 56 310 5182