1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 <2008> 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 <2008> 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | VME Toaster - has anyone else experienced this? |
From: | "Gillingham, IJ \(Ian\)" <[email protected]> |
To: | <[email protected]> |
Date: | Wed, 9 Jan 2008 14:11:01 -0000 |
On the night of 30th December 2007, a fire broke out in one of our control system's VME crates. Considerable damage was inflicted on the crate, but fortunately the fire did not spread. On examination of the crate and VME cards, the P1 connector, to which a "MAXv 8000" card was connected, had been destroyed by heat/flame. Electrical burning of some components was evident on the MAXv card, these components were well away from the direct heat of the main area of combustion (components close to the fire were of course destroyed).
We are presently trying to ascertain which component caused the failure (the MAXv card, P1 connector or VME backplane).
Has anyone else experienced this type of event, in particular with the MAXv motor control card?
Ian Gillingham
Diamond Light Source