1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 <2008> 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 <2008> 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: CA Gateway environment variable configuration |
From: | Dirk Zimoch <[email protected]> |
To: | Carl Schumann <[email protected]> |
Cc: | [email protected] |
Date: | Mon, 22 Sep 2008 10:11:37 +0200 |
You probably want to set the variables EPICS_CA_MAX_ARRAY_BYTES=<the largest array you have in your whole system> EPICS_CAS_BEACON_ADDR_LIST=<all networks where clients may run>
Best regards, Dirk
Hi,
I am trying to get a CA gateway going. The gateway logs the following:It reports many environment variables as "Not specified". Should I be specifying them or will reasonable defaults be used?Starting EPICS CA gateway Sep 19 16:35:28 PV Gateway Version 2.0.3.0 [Sep 11 2008 07:53:33] EPICS 3.14.9 PID=15076 EPICS_CA_ADDR_LIST=cag-hins-1.fnal.gov EPICS_CA_AUTO_ADDR_LIST=NO EPICS_CA_SERVER_PORT=Not specified EPICS_CA_MAX_ARRAY_BYTES=Not specified EPICS_CAS_INTF_ADDR_LIST=clx74.fnal.gov EPICS_CAS_SERVER_PORT=Not specified EPICS_CAS_IGNORE_ADDR_LIST=Not specified Running as user schumann on host clx74.fnal.gov Statistics PV prefix is clx74.fnal.gov
Thanks, Carl Schumann
-- Dr. Dirk Zimoch Paul Scherrer Institut, WBGB/006 5232 Villigen PSI, Switzerland Phone +41 56 310 5182