1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 <2009> 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 <2009> 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: Motor problems(RBV can't update itself) |
From: | John Hammonds <[email protected]> |
To: | "Xu, Huijuan" <[email protected]> |
Cc: | [email protected] |
Date: | Sat, 21 Mar 2009 13:04:10 -0500 |
HuijuanI am not sure if this specific problem is covered by the updates but there are some significant issues with OMS drivers in motor version 6-3. I would recommend moving to motor version 6-4-2.
John Xu, Huijuan wrote:
Hello,I’m using OMS MAXv motion controller. The motor record version is 6.3. The motor worked well several days ago with this version but goes weird when I use it today.RBV field can’t update automatically. I have to reset the MRES or ERES field and just the two fields to update RBV.MOVN kept 1 all the time after motor began its first moving. DMOV does not reset to 1 after position is reached.Many thanks. Regards, Huijuan
--
John Hammonds
Beamline Controls and Data Acquisition Group
APS Engineering Support Division
Argonne National Laboratory
[email protected] <mailto:[email protected]>
(630)252-5317