1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 <2010> 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 <2010> 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | No HomeStatus and No Motion with OMS MAXv : Motor 6.5.1 / VxWorks 6.8 / base 3.14.11 |
From: | Jerome HOSSELET <[email protected]> |
To: | [email protected] |
Date: | Mon, 11 Oct 2010 17:08:02 +0200 |
Hi all, I have some troubles with a motor driver v 6.5.1 and EPICS base 3.14.11 and VxWorks 6.8 VxWorks 6.8 : install ok Base EPICS 3.14.11 : compilation ok Support motor 6.5.1: compilation ok I use a MAXv-4000 with a servo configuration (PSM configuration). When i use a VxWorks 6.7 and motor 6.4.4 and base 3.14.8.2 => all it's ok but when i move in last release all package it doesn't works. The home status : ATHM always = 0 During the motion a message appear Motion = "Move" && "Communication error" When i check my analogic output for motor 1 (commande analogic to the servo) I probe always 10 V. It's not normal ...... Ron or other can i help me ? Jerome HOSSELET [email protected]