Experimental Physics and Industrial Control System
|
Subject: |
No motion and No homeStatus motor:6.51/VxWorks:6.8/base 3.14.11: No change with a new motor.h |
|
From: |
Jerome HOSSELET <[email protected]> |
|
To: |
[email protected] |
|
Date: |
Tue, 12 Oct 2010 09:49:50 +0200 |
Hi all,
I put a new motor.h in motorApp/motorSrc/
I recompile a support motor.
I recompile my EmittanceApp with a new support motor.
but nothing change
I don't see a home status and motion not working
I see " Move"
and after a little time
I see "Comm. Failure"
on debug trace a I see
sevr=minor Motor motion timeout ERROR on card: 0, signal: 0
I already have this message but only when motor is blocking
Thanks per advance
Jerome HOSSELET
[email protected]
- Navigate by Date:
- Prev:
RE: Timeout errors with ASYN Modbus Driver 2.0 Mark Rivers
- Next:
Re: gateway putlog Andrew Johnson
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
<2010>
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: Timeout errors with ASYN Modbus Driver 2.0 Mark Rivers
- Next:
Calling an iocsh "sub-script" Angus Gratton
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
<2010>
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024