EPICS Re: DHCP/BOOTP configuration for EPICS with RTEMS

Experimental Physics and Industrial Control System

1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 <2012> 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024	Index	1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 <2012> 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024
<== Date ==>		<== Thread ==>

Subject:	Re: DHCP/BOOTP configuration for EPICS with RTEMS
From:	Bruno Seiva Martins <[email protected]>
To:	Eric Norum <[email protected]>
Cc:	[email protected]
Date:	Mon, 24 Sep 2012 13:57:48 -0300

So this is what was missing!

Thanks! It runs fine now!

Bruno Seiva Martins

On Mon, Sep 24, 2012 at 1:15 PM, Eric Norum <[email protected]> wrote:

The RTEMS BOOTP/DHCP code uses code 66 to set the NFS server name and code 129 for the 'command line string' from which the EPICS startup code parses the local mount point and remote mount path.

--
Eric Norum
[email protected]

References:: DHCP/BOOTP configuration for EPICS with RTEMS Bruno Seiva Martins; Re: DHCP/BOOTP configuration for EPICS with RTEMS Eric Norum; Re: DHCP/BOOTP configuration for EPICS with RTEMS Bruno Seiva Martins; Re: DHCP/BOOTP configuration for EPICS with RTEMS Eric Norum

Navigate by Date:: Prev: Re: Problem with using strings to access enum indices on Windows Andrew Johnson; Next: RE: CAC problem between RTEMS and vxWorks Hill, Jeff; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 <2012> 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024
Navigate by Thread:: Prev: Re: DHCP/BOOTP configuration for EPICS with RTEMS Eric Norum; Next: Microsoft managed code CLI C++ and EPICS Mark Clift; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 <2012> 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024