1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 <2016> 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 <2016> 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Question about the softioc connection refused ? |
From: | lzfneu <[email protected]> |
To: | "[email protected]" <[email protected]> |
Date: | Sat, 19 Mar 2016 12:26:52 +0000 |
hi,
I have encountered another softioc connection problem: I have insatlled modbus-R2-8, and want to run test example (file named Koyo1.cmd) in the iocTest folder. I edited the Koyo1.cmd file to change the ip address in function with two conditions: 1) drvAsynIPPortConfigure("Koyo1","127.0.0.1:5065",0,0,1) where 127.0.0.1:5065 is my localhost ip address. 2) drvAsynIPPortConfigure("Koyo1","192.168.1.255:5065",0,0,1) where 192.168.1.255:5065 is my broadcast ip address that obtained by command ifconfig. after starting the ioc: $ modbusApp Koyo1.cmd the results are both two ip address cannot connect the Koyo1, the error messages are shown below: 1) drvAsynIPPortConfigure("Koyo1","127.0.0.1:5065",0,0,1) 2016/03/19 19:40:19.158 Can't connect to 127.0.0.1:5065: Connection refused Koyo1 -1 autoConnect could not connect 2) drvAsynIPPortConfigure("Koyo1","192.168.1.255:5065",0,0,1) 2016/03/19 20:19:49.083 Can't connect to 192.168.1.255:5065: Network is unreachable Koyo1 -1 autoConnect could not connect I am new in epics, could you plesase help me and thanks in advance. Best regards Zhefu |