Hi everyone,
Now I try to study control the motor.
I update seq-2-2-1 to seq-2.2.3.
And others not changed are synApps_5_8, epics 3.12.14.5.
Then when I make motor-6-9, I got these error:
***************************************************
****
make[3]: Nothing to be done for `install'.
make[3]: Leaving directory `/home/lyx/epics3.14.12.5/synApps_5_8/support/motor-6-9/motorApp/DeltaTauSrc/O.linux-x86_64'
make[2]: Leaving directory `/home/lyx/epics3.14.12.5/synApps_5_8/support/motor-6-9/motorApp/DeltaTauSrc'
make -C ./OmsSrc install
make[2]: Entering directory `/home/lyx/epics3.14.12.5/synApps_5_8/support/motor-6-9/motorApp/OmsSrc'
make -C O.linux-x86_64 -f ../Makefile TOP=../../.. \
T_A=linux-x86_64 install
make[3]: Entering directory `/home/lyx/epics3.14.12.5/synApps_5_8/support/motor-6-9/motorApp/OmsSrc/O.linux-x86_64'
make[3]: *** No rules can be created“MAX_trajectoryScan.o”Need Target“/home/lyx/epics3.14.12.5/synApps_5_8/support/seq-2-2-1/include/seq_snc.h”。 Stop。
make[3]: Leaving directory `/home/lyx/epics3.14.12.5/synApps_5_8/support/motor-6-9/motorApp/OmsSrc/O.linux-x86_64'
make[2]: *** [install.linux-x86_64] Error 2
make[2]: Leaving directory `/home/lyx/epics3.14.12.5/synApps_5_8/support/motor-6-9/motorApp/OmsSrc'
make[1]: *** [OmsSrc.install] Error 2
make[1]: Leaving directory `/home/lyx/epics3.14.12.5/synApps_5_8/support/motor-6-9/motorApp'
make: *** [motorApp.install] Error 2
Could someone tell me the reason?
Thank you!
Li X