1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 <2016> 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 <2016> 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | RE: StreamDevice fails to compile for RTEMS targets. |
From: | "Mooney, Tim M." <[email protected]> |
To: | Michael Westfall <[email protected]>, "[email protected] Talk" <[email protected]> |
Date: | Thu, 6 Oct 2016 21:01:06 +0000 |
Hi Mike,
Take a look at streamApp/Makefile. The version on github has these lines:
It's complicated, because calc will build with or without sscan. (Older calc versions could not build without sscan.) If calc is built with sscan, anything that uses calc must link against sscan. If your copy of stream has "PROD_LIBS += sscan" commented out, uncomment that line. Tim Mooney ([email protected]) (630)252-5417
Beamline Controls Group (www.aps.anl.gov) Advanced Photon Source, Argonne National Lab From: [email protected] [[email protected]] on behalf of Michael Westfall [[email protected]]
Sent: Thursday, October 06, 2016 3:44 PM To: [email protected] Talk Subject: Fwd: StreamDevice fails to compile for RTEMS targets. Sorry, I should have sent this to the list....
---------- Forwarded message ----------
From: Michael Westfall <[email protected]> Date: Thu, Oct 6, 2016 at 2:49 PM Subject: Re: StreamDevice fails to compile for RTEMS targets. I do have sscan (and all the other dependencies, such as seq, calc, asyn, pcre) built for both the host and the RTEMS targets.
Here's my .../configure/RELEASE: TEMPLATE_TOP=${EPICS_BASE}/ SUPTOP=/home/mikew/epics/ SNCSEQ=$(SUPTOP)/seq ASYN=$(SUPTOP)/asyn CALC=$(SUPTOP)/calc SSCAN=$(SUPTOP)/sscan PCRE=$(SUPTOP)/pcre EPICS_BASE=/gem_sw/epics/R3. It fails the same whether SSCAN is defined or not.
Also, as I noted, it builds fine for the Linux host, but fails for the RTEMS targets.On Thu, Oct 6, 2016 at 2:30 PM, Mooney, Tim M.
<[email protected]> wrote:
-- Mike Westfall
Control Systems Software Engineer
-- Mike Westfall
Control Systems Software Engineer
|