1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 <2020> 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 <2020> 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: XSPRESS3 hdf5 problems |
From: | John Dobbins via Tech-talk <tech-talk at aps.anl.gov> |
To: | Matt Newville <newville at cars.uchicago.edu> |
Cc: | "tech-talk at aps.anl.gov" <tech-talk at aps.anl.gov> |
Date: | Tue, 28 Jan 2020 15:51:17 +0000 |
Matt,
Thanks, I knew nothing about the /dev/shm/xsp3* bit. That did the trick. The IOC
now starts and connects.
John
From: Matt Newville <newville at cars.uchicago.edu>
Sent: Tuesday, January 28, 2020 9:43 AM To: John Dobbins <john.dobbins at cornell.edu> Cc: Mark Rivers <rivers at cars.uchicago.edu>; tech-talk at aps.anl.gov <tech-talk at aps.anl.gov> Subject: Re: XSPRESS3 hdf5 problems Hi John,
On Mon, Jan 27, 2020 at 2:22 PM John Dobbins <john.dobbins at cornell.edu> wrote:
Do you have and are you loading Xspress3 settings and calibrations files for 6 channels or for 4 channels? Somewhere in the IOC startup, you have to define where these settings files
are, with something like
dbpf("$(PREFIX)det1:CONFIG_PATH", "/home/xspress3/xspress3_settings/current/") And these settings really should be for the correct number of channels. If you change the number of channels I believe you need to remove the shared memory files in /dev/shm/xsp3*.
These files will be re-created when the IOC restarts the xspress3 server.
--Matt Newville
|