| 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 <2020> 2021 2022 2023 2024 2025 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 <2020> 2021 2022 2023 2024 2025 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | Re: Archiver Appliance PVs never connect to be archived, always "Initial Sampling" |
| From: | "Manoussakis, Adamandios via Tech-talk" <tech-talk at aps.anl.gov> |
| To: | "tech-talk at aps.anl.gov" <tech-talk at aps.anl.gov>, "Shankar, Murali" <mshankar at slac.stanford.edu> |
| Date: | Fri, 30 Oct 2020 18:43:36 +0000 |
|
Thanks Murali I will check that out.
From: Tech-talk <tech-talk-bounces at aps.anl.gov> on behalf of Shankar, Murali via Tech-talk <tech-talk at aps.anl.gov>
Sent: Friday, October 30, 2020 7:55 AM To: tech-talk at aps.anl.gov <tech-talk at aps.anl.gov> Subject: RE: Archiver Appliance PVs never connect to be archived, always "Initial Sampling"
The archiver needs a proper EPICS setup for it to connect to the IOC's. The engine's arch.log should print out the actual CA configuration being used so you can look there to see if the EPICS setup was inherited correctly from your .profile.
Regards,
Murali
|