Re: [EXTERNAL] Re: lakeshore336 msi: Can't open file 'ioc_sns.db'

[Juliane Reinhardt via Tech-talk <tech-talk at aps.anl.gov>]

Hi Han,

Thanks for the prompt reply. The repository is here: 
https://github.com/mp49/lakeshore
Yes I saw these error but then when I looked into the dbd or db files I 
could not see what the actual issue was.

Juliane

On 12/17/20 23:11, Jeong Han Lee wrote:
> Hi Juliane,
>
> Your DBD file, example.dbd is wrong. So you have a lot of error
> message in your IOC startup. Please see below "snip snip section"
> Since I can get the code of this repository if this is public, could
> you point me where your repository is?  I cc this email to my lab
> account.
> And ALS also has the similar db file, which you may get more benefit
> from your IOC also.
>
> Han
>
> --- snip snip ---
> dbLoadDatabase "dbd/example.dbd"\
> Declaration of recordtype(scalcout) preceeded full definition.\
> Error at or before "\}" in file "dbd/example.dbd" line 10293\
>
> --- snip snip ---
>
> On Thu, Dec 17, 2020 at 9:53 PM Juliane Reinhardt <jreinhardt at lbl.gov> wrote:
> > Hi everyone,
> >
> > Thanks for your help to build the IOC.
> > I pulled the latest version with the sns specific template removed and
> > rebuilt the application after modifying the configure/RELEASE file. That
> > worked fine. However, when starting the IOC I get multiple errors. I
> > searched for solutions but wasn't successful yet. I would appreciate if
> > you could point me to some solution as I am still relatively new to
> > EPICS and with every IOC installation I learn more but only after
> > running into quite some issues. I attached the output of the ioc startup.
> >
> > Best,
> > Juliane
> >
> > On 12/15/20 07:27, Pearson, Matthew R. wrote:
> > > Hi,
> > >
> > > Sorry about that. Steve is right, it's just a SNS specific template that shouldn't have been in the example IOC. I've removed the use of devIocStats from the example IOC on GitHub.
> > >
> > > Cheers,
> > > Matt
> > >
> > > > -----Original Message-----
> > > > From: Tech-talk <tech-talk-bounces at aps.anl.gov> On Behalf Of Hartman,
> > > > Steven via Tech-talk
> > > > Sent: Tuesday, December 15, 2020 9:15 AM
> > > > To: Jeong Han Lee <citadel.lee at gmail.com>; Juliane Reinhardt
> > > > <jreinhardt at lbl.gov>
> > > > Cc: tech-talk <tech-talk at aps.anl.gov>
> > > > Subject: Re: [EXTERNAL] Re: lakeshore336 msi: Can't open file 'ioc_sns.db'
> > > >
> > > >
> > > >
> > > > > On Dec 15, 2020, at 2:27 AM, Jeong Han Lee via Tech-talk <tech-
> > > > talk at aps.anl.gov> wrote:
> > > > >    Please look at the example.substitutions file. It uses ioc_sns.db
> > > > > within there. My first guess ioc_sns.db file is missing or is located
> > > > > in a wrong directory.
> > > >
> > > > ioc_sns.db is a local configuration file for customizing iocStats on the SNS
> > > > beam lines. It can be safely ignored / commented out.
> > > >
> > > > --
> > > > Steven Hartman
> > > > hartmansm at ornl.gov
> > --
> > Juliane Reinhardt, PhD
> > Project Scientist | ALS Computing Group
> > Blg. 15-337E | phone: 510-486-4313
> > jreinhardt at lbl.gov
> > Lawrence Berkeley National Lab

--
Juliane Reinhardt, PhD
Project Scientist | ALS Computing Group
Blg. 15-337E | phone: 510-486-4313
jreinhardt at lbl.gov
Lawrence Berkeley National Lab