| 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 <2022> 2023 2024 2025 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 <2022> 2023 2024 2025 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | Re: Develop motor drivers using controller's DLL |
| From: | Laurenz Rettig via Tech-talk <tech-talk at aps.anl.gov> |
| To: | tech-talk at aps.anl.gov |
| Date: | Sun, 6 Mar 2022 11:05:53 +0100 |
Hi Zongyang,
I started building a motor driver based on a vendor-provided dll for a Manipualtor from Prevac, which partially works, but is not yet finished. If you are intestested, I can share that with you as a starting point. But as I say, it's work in progress (since quite some time now...)
Best, Laurenz
Hi Zongyang,
> I want to develop the motor driver, based on the DLL of the motion controller.
> I hope someone can provide development ideas, preferably an existing case.
These are 2 motor drivers I found that require a vendor supplied library, rather than being built just from source code.
Mark
From: Tech-talk <tech-talk-bounces at aps.anl.gov> on behalf of 岳宗仰 via Tech-talk <tech-talk at aps.anl.gov>
Sent: Saturday, March 5, 2022 8:05 AM
To: tech-talk at aps.anl.gov <tech-talk at aps.anl.gov>
Subject: Develop motor drivers using controller's DLLHi tech-talk
I want to develop the motor driver, based on the DLL of the motion controller.
I hope someone can provide development ideas, preferably an existing case.
Thanks
Zongyang Yue
-- Dr. Laurenz Rettig Fritz Haber Institute of the Max Planck Society Department of Physical Chemistry Dynamics of Correlated Materials Faradayweg 4-6 14195 Berlin, Germany phone: +49-(0)30-8413 5225 email: rettig at fhi-berlin.mpg.de
Attachment:
smime.p7s
Description: S/MIME Cryptographic Signature