| 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 <2022> 2023 2024 2025 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 <2022> 2023 2024 2025 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | RE: ADEiger R3-4 EIGER1 param=high_voltage/state |
| From: | Mark Rivers via Tech-talk <tech-talk at aps.anl.gov> |
| To: | John Dobbins <john.dobbins at cornell.edu> |
| Cc: | "tech-talk at aps.anl.gov" <tech-talk at aps.anl.gov> |
| Date: | Wed, 15 Jun 2022 19:02:12 +0000 |
|
Hi John, You can ignore that message. The driver only polls that value if it is an Eiger2, but it does create the parameter even if it is an Eiger1. That is a mistake and I will fix
it in a future release. Mark From: Tech-talk <tech-talk-bounces at aps.anl.gov>
On Behalf Of John Dobbins via Tech-talk All, I just built ADEiger from the current Master (R3-4). When I start the EIGER1 IOC I get a message RestApi::get: [param=high_voltage/state] server returned error code 500
2022/06/15 14:23:47.959 Param[HV_STATE]::baseFetch: [param=high_voltage/state] unable to parse json response [] 2022/06/15 14:23:47.959 Param[HV_STATE]::fetch<string>: [param=HV_STATE] underlying baseFetch failed The is after eigerDetectorConfig. According to the ADEiger/RELEASE.md high_voltage/state is only available on EIGER2. asyn port: EIG EPICS name: EIG2:cam1: Model: Eiger 4M Firmware: eiger-1.6.6-272.gitb59a1d9.release SDK: 1.6.6 Driver version: 3.4.0 ADCore : 3.12.1 John Dobbins Research Support Specialist Cornell High Energy Synchrotron Source Cornell University |