Re: Using opencv with areaDetector

[William Smith via Tech-talk <tech-talk at aps.anl.gov>]

Title: Re: Using opencv with areaDetector

Here is the output after running make clean uninstall; make in ADSimDetector.

make[5]: Leaving directory '/opt/epics/areaDetector/ADSimDetector/iocs/simDetectorIOC/simDetectorApp/Db/O.linux-x86_64'
make[4]: Leaving directory '/opt/epics/areaDetector/ADSimDetector/iocs/simDetectorIOC/simDetectorApp/Db'
make[5]: *** No rule to make target '../../../lib/linux-x86_64/libopencv_core.a', needed by 'simDetectorNoIOCApp'. Stop.
make[5]: Leaving directory '/opt/epics/areaDetector/ADSimDetector/iocs/simDetectorNoIOC/simDetectorNoIOCApp/src/O.linux-x86_64'
make[4]: *** [/opt/epics/epics-base/configure/RULES_ARCHS:58: install.linux-x86_64] Error 2
make[4]: Leaving directory '/opt/epics/areaDetector/ADSimDetector/iocs/simDetectorNoIOC/simDetectorNoIOCApp/src'
make[3]: *** [/opt/epics/epics-base/configure/RULES_DIRS:85: src.install] Error 2
make[3]: Leaving directory '/opt/epics/areaDetector/ADSimDetector/iocs/simDetectorNoIOC/simDetectorNoIOCApp'
make[2]: *** [/opt/epics/epics-base/configure/RULES_DIRS:85: simDetectorNoIOCApp.install] Error 2
make[2]: Leaving directory '/opt/epics/areaDetector/ADSimDetector/iocs/simDetectorNoIOC'
make[1]: *** [/opt/epics/epics-base/configure/RULES_DIRS:85: simDetectorNoIOC.install] Error 2
make[1]: *** Waiting for unfinished jobs....
make[5]: *** No rule to make target '../../../lib/linux-x86_64/libopencv_core.a', needed by 'simDetectorApp'. Stop.
make[5]: Leaving directory '/opt/epics/areaDetector/ADSimDetector/iocs/simDetectorIOC/simDetectorApp/src/O.linux-x86_64'
make[4]: *** [/opt/epics/epics-base/configure/RULES_ARCHS:58: install.linux-x86_64] Error 2
make[4]: Leaving directory '/opt/epics/areaDetector/ADSimDetector/iocs/simDetectorIOC/simDetectorApp/src'
make[3]: *** [/opt/epics/epics-base/configure/RULES_DIRS:85: src.install] Error 2
make[3]: Leaving directory '/opt/epics/areaDetector/ADSimDetector/iocs/simDetectorIOC/simDetectorApp'
make[2]: *** [/opt/epics/epics-base/configure/RULES_DIRS:85: simDetectorApp.install] Error 2
make[2]: Leaving directory '/opt/epics/areaDetector/ADSimDetector/iocs/simDetectorIOC'
make[1]: *** [/opt/epics/epics-base/configure/RULES_DIRS:85: simDetectorIOC.install] Error 2
make[1]: Leaving directory '/opt/epics/areaDetector/ADSimDetector/iocs'
make: *** [/opt/epics/epics-base/configure/RULES_DIRS:85: iocs.install] Error 2

--------------------Original message--------------------
From: William Smith <william.smith at helmholtz-berlin.de>
Sent: Tuesday, August 8, 2023 15:11
To: Mark Rivers <rivers at cars.uchicago.edu>
Cc: tech-talk at aps.anl.gov
Subject: Re: Using opencv with areaDetector

make -C /opt/epics/areaDetector/ADSimDetector install
make[1]: Entering directory '/opt/epics/areaDetector/ADSimDetector'
make -C ./configure install
make[2]: Entering directory '/opt/epics/areaDetector/ADSimDetector/configure'
make -C O.linux-x86_64 -f ../Makefile TOP=../.. \
T_A=linux-x86_64 install
make[3]: Entering directory '/opt/epics/areaDetector/ADSimDetector/configure/O.linux-x86_64'
perl -CSD /opt/epics/epics-base/bin/linux-x86_64/convertRelease.pl checkRelease
make[3]: Leaving directory '/opt/epics/areaDetector/ADSimDetector/configure/O.linux-x86_64'
make[2]: Leaving directory '/opt/epics/areaDetector/ADSimDetector/configure'
make -C ./simDetectorApp install
make[2]: Entering directory '/opt/epics/areaDetector/ADSimDetector/simDetectorApp'
make -C ./src install
make[3]: Entering directory '/opt/epics/areaDetector/ADSimDetector/simDetectorApp/src'
make -C O.linux-x86_64 -f ../Makefile TOP=../../.. \
T_A=linux-x86_64 install
make[4]: Entering directory '/opt/epics/areaDetector/ADSimDetector/simDetectorApp/src/O.linux-x86_64'
make[4]: Nothing to be done for 'install'.
make[4]: Leaving directory '/opt/epics/areaDetector/ADSimDetector/simDetectorApp/src/O.linux-x86_64'
make[3]: Leaving directory '/opt/epics/areaDetector/ADSimDetector/simDetectorApp/src'
make -C ./Db install
make[3]: Entering directory '/opt/epics/areaDetector/ADSimDetector/simDetectorApp/Db'
make -C O.linux-x86_64 -f ../Makefile TOP=../../.. \
T_A=linux-x86_64 install
make[4]: Entering directory '/opt/epics/areaDetector/ADSimDetector/simDetectorApp/Db/O.linux-x86_64'
make[4]: Nothing to be done for 'install'.
make[4]: Leaving directory '/opt/epics/areaDetector/ADSimDetector/simDetectorApp/Db/O.linux-x86_64'
make[3]: Leaving directory '/opt/epics/areaDetector/ADSimDetector/simDetectorApp/Db'
make -C ./op install
make[3]: Entering directory '/opt/epics/areaDetector/ADSimDetector/simDetectorApp/op'
make[3]: Nothing to be done for 'install'.
make[3]: Leaving directory '/opt/epics/areaDetector/ADSimDetector/simDetectorApp/op'
make[2]: Leaving directory '/opt/epics/areaDetector/ADSimDetector/simDetectorApp'
make -C ./iocs install
make[2]: Entering directory '/opt/epics/areaDetector/ADSimDetector/iocs'
make -C ./simDetectorNoIOC install
make[3]: Entering directory '/opt/epics/areaDetector/ADSimDetector/iocs/simDetectorNoIOC'
make -C ./configure install
make[4]: Entering directory '/opt/epics/areaDetector/ADSimDetector/iocs/simDetectorNoIOC/configure'
make -C O.linux-x86_64 -f ../Makefile TOP=../.. \
T_A=linux-x86_64 install
make[5]: Entering directory '/opt/epics/areaDetector/ADSimDetector/iocs/simDetectorNoIOC/configure/O.linux-x86_64'
perl -CSD /opt/epics/epics-base/bin/linux-x86_64/convertRelease.pl checkRelease
make[5]: Leaving directory '/opt/epics/areaDetector/ADSimDetector/iocs/simDetectorNoIOC/configure/O.linux-x86_64'
make[4]: Leaving directory '/opt/epics/areaDetector/ADSimDetector/iocs/simDetectorNoIOC/configure'
make -C ./simDetectorNoIOCApp install
make[4]: Entering directory '/opt/epics/areaDetector/ADSimDetector/iocs/simDetectorNoIOC/simDetectorNoIOCApp'
make -C ./src install
make[5]: Entering directory '/opt/epics/areaDetector/ADSimDetector/iocs/simDetectorNoIOC/simDetectorNoIOCApp/src'
make -C O.linux-x86_64 -f ../Makefile TOP=../../.. \
T_A=linux-x86_64 install
make[6]: Entering directory '/opt/epics/areaDetector/ADSimDetector/iocs/simDetectorNoIOC/simDetectorNoIOCApp/src/O.linux-x86_64'
make[6]: *** No rule to make target '../../../lib/linux-x86_64/libopencv_core.a', needed by 'simDetectorNoIOCApp'. Stop.
make[6]: Leaving directory '/opt/epics/areaDetector/ADSimDetector/iocs/simDetectorNoIOC/simDetectorNoIOCApp/src/O.linux-x86_64'
make[5]: *** [/opt/epics/epics-base/configure/RULES_ARCHS:58: install.linux-x86_64] Error 2
make[5]: Leaving directory '/opt/epics/areaDetector/ADSimDetector/iocs/simDetectorNoIOC/simDetectorNoIOCApp/src'
make[4]: *** [/opt/epics/epics-base/configure/RULES_DIRS:85: src.install] Error 2
make[4]: Leaving directory '/opt/epics/areaDetector/ADSimDetector/iocs/simDetectorNoIOC/simDetectorNoIOCApp'
make[3]: *** [/opt/epics/epics-base/configure/RULES_DIRS:85: simDetectorNoIOCApp.install] Error 2
make[3]: Leaving directory '/opt/epics/areaDetector/ADSimDetector/iocs/simDetectorNoIOC'
make[2]: *** [/opt/epics/epics-base/configure/RULES_DIRS:85: simDetectorNoIOC.install] Error 2
make[2]: Leaving directory '/opt/epics/areaDetector/ADSimDetector/iocs'
make[1]: *** [/opt/epics/epics-base/configure/RULES_DIRS:85: iocs.install] Error 2
make[1]: Leaving directory '/opt/epics/areaDetector/ADSimDetector'
make: *** [/opt/epics/epics-base/configure/RULES_DIRS:85: /opt/epics/areaDetector/ADSimDetector.install] Error 2

--------------------Original message--------------------
From: Mark Rivers <rivers at cars.uchicago.edu>
Sent: Tuesday, August 8, 2023 13:31
To: William Smith <william.smith at helmholtz-berlin.de>
Cc: tech-talk at aps.anl.gov
Subject: Re: Using opencv with areaDetector

Send the complete link line that fails.

Mark

Sent from my iPhone

On Aug 8, 2023, at 5:17 AM, William Smith via Tech-talk <tech-talk at aps.anl.gov> wrote:

Dear Tech-Talk, 

I am trying to use opencv with areaDetector. To start, I have been trying to build with the ADPluginEdge plugin

I am using ubuntu 20.04
I have pulled AD 3-12-1
I have installed opencv using the package manager. sudo apt install libopencv-dev
I have checked that the commonDriverMakefile in ADCore contains ifdef ADPLUGINBAR....
I have checked that in CONFIG_SITE.local.linux-x86_64 the following is set

WITH_OPENCV = YES

OPENCV_EXTERNAL = YES

I had to add the include directory because opencv 4.2.0 includes are under /usr/includes/opencv4

OPENCV = /usr

OPENCV_LIB = $(OPENCV)/lib

OPENCV_INCLUDE = -I$(OPENCV)/include/opencv4

ADSupport, ADCore and ADPluginEdge build without errors. Then when I try to build an example IOC using ADSimDetector I get the following error:

No rule to make target '../../../lib/linux-x86_64/libopencv_core.a', needed by 'simDetectorApp'

It feels like it isn't looking in the EXTERNAL location like I tell it to. Have I missed something? Does anyone have a suggestion?

Thanks, 

Will