1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 <2024> | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 <2024> |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: Required Perl modules? |
From: | John Dobbins via Tech-talk <tech-talk at aps.anl.gov> |
To: | Mark Rivers <rivers at cars.uchicago.edu> |
Cc: | "tech-talk at aps.anl.gov" <tech-talk at aps.anl.gov> |
Date: | Wed, 5 Jun 2024 18:25:25 +0000 |
Is there an example st.cmd file for a BlackFlyS USB camera?
iocBoot/iocSpinnaker/start_epics references st.cmd.bflys_usb3
but that doesn't exist.
Thanks,
John
From: John Dobbins <john.dobbins at cornell.edu>
Sent: Wednesday, June 5, 2024 9:32 AM To: Mark Rivers <rivers at cars.uchicago.edu> Cc: tech-talk at aps.anl.gov <tech-talk at aps.anl.gov> Subject: Re: Required Perl modules?
My bad. I incorrectly cloned ADGenICam into ADGeniCam. John
From: John Dobbins <john.dobbins at cornell.edu>
Sent: Wednesday, June 5, 2024 9:28 AM To: Mark Rivers <rivers at cars.uchicago.edu>; John Dobbins <john.dobbins at cornell.edu> Cc: tech-talk at aps.anl.gov <tech-talk at aps.anl.gov> Subject: Re: Required Perl modules?
I should note the running make in ADGeniCam works but running make in support_flir stir produces the same error.
John
From: Tech-talk <tech-talk-bounces at aps.anl.gov> on behalf of John Dobbins via Tech-talk <tech-talk at aps.anl.gov>
Sent: Wednesday, June 5, 2024 9:22 AM To: Mark Rivers <rivers at cars.uchicago.edu> Cc: tech-talk at aps.anl.gov <tech-talk at aps.anl.gov> Subject: Re: Required Perl modules?
Mark,
Using base-7.0.6, areaDetector-R3-13, and your list of prerequisites below I have gotten as far as ADGeniCam (in my effort to get to ADSpinnaker).
Stuck at:
make[4]: Entering directory '/nfs/chess/epics/det/support_flir/areaDetector-R3-13/ADCore/ADApp/op'
make[4]: Nothing to be done for 'install'.
make[4]: Leaving directory '/nfs/chess/epics/det/support_flir/areaDetector-R3-13/ADCore/ADApp/op'
make[3]: Leaving directory '/nfs/chess/epics/det/support_flir/areaDetector-R3-13/ADCore/ADApp'
make[2]: Leaving directory '/nfs/chess/epics/det/support_flir/areaDetector-R3-13/ADCore'
make -C /nfs/chess/epics/det/support_flir/areaDetector-R3-13/ADGenICam install
make[2]: Entering directory '/nfs/chess/epics/det/support_flir/areaDetector-R3-13/ADGenICam'
make[2]: *** No rule to make target 'install'. Stop.
make[2]: Leaving directory '/nfs/chess/epics/det/support_flir/areaDetector-R3-13/ADGenICam'
make[1]: *** [/nfs/chess/epics/det/base-7.0.6/configure/RULES_DIRS:85: /nfs/chess/epics/det/support_flir/areaDetector-R3-13/ADGenICam.install] Error 2
make[1]: Leaving directory '/nfs/chess/epics/det/support_flir/areaDetector-R3-13'
make: *** [/nfs/chess/epics/det/base-7.0.6/configure/RULES_DIRS:85: /nfs/chess/epics/det/support_flir/areaDetector-R3-13.install] Error 2
jad22@lnx209 $ gedit /nfs/chess/epics/det/base-7.0.6/configure/RULES_DIRS &
John
From: Mark Rivers <rivers at cars.uchicago.edu>
Sent: Monday, June 3, 2024 9:31 PM To: John Dobbins <john.dobbins at cornell.edu> Cc: tech-talk at aps.anl.gov <tech-talk at aps.anl.gov> Subject: Re: Required Perl modules? Hi John,
This is what I have found necessary for our installations.
In order to build EPICS base and the synApps support tree, including our local application, on RHEL 9 I needed to install the following additional packages:
areaDetector needs aravis to be installed. aravis requires installing
Measurement Computing support requires installing their uldaq library, which is built from source. That can be built and installed as follows:
./configure make sudo make install Mark
Sent from my iPhone
On Jun 3, 2024, at 7:20 PM, John Dobbins via Tech-talk <tech-talk at aps.anl.gov> wrote:
|