EPICS Home

Experimental Physics and Industrial Control System


 
<19941995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index <19941995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: APS Event Hardware
From: [email protected]
Date: Tue, 23 Aug 1994 14:08:39 -0700
Does anyone have the following figures for the APS event hardware:

o event timing jitter when running events from a sequence RAM.

o time stamp latency (including interrupt latency, processing overhead, etc)
for ER and EREVENT records (EPICS R3.11.x, MV167 CPU).

For chopping of the secondary mirror at 10Hz we need to process one event
(either CHOP+ or CHOP-) every 50msecs but with a jitter of less than 1 part
in 100,000.

Thanks,
	Peregrine
_______________________________________________________________________________
Peregrine M. McGehee			Controls Group	
Gemini 8-Meter Telescopes Project	PO Box 26732, Tucson, AZ 85726-2632
E-mail:	[email protected]		Phone: (602) 321-3423

Navigate by Date:
Prev: Re: a friend in need Jim B. Kowalkowski
Next: Re: APS Event Hardware watson
Index: <19941995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: RE: a friend in need Gabor Csuka, DESY - Germany
Next: Re: APS Event Hardware watson
Index: <19941995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024