Experimental Physics and Industrial Control System
Subject: |
Re: Recommended setting for XyCom 566 Analog input module? |
From: |
Andrew Johnson <[email protected]> |
Date: |
Tue, 9 May 1995 09:22:05 BST |
On Fri, 05 May 1995 17:31:02 PST Tony Cox - (415)926-3105 wrote:
> Here's a novice question. I'm starting to set up the hardware for
> our beamline (all dealings with EPICS so far have been theoretical(!)), and
> so I'm trying to interface my first module, the XVME-566.
>
> Naturally, there are numerous jumpers and options. CSR addresses,
> data RAM addresses, interrupt levels etc. Quite a jumble for the first
> module.
>
> Can anyone give me a quick, simple, tutorial on what the appropriate
> values should be, and how these might relate to the DCT VME parameters
> Card/Signal/Parameter?
I have worked out most of the jumper settings for the XVME-566 for Gemini, and
they are described in my Standard Controller Hardware Documentation, available
at the following URLs:
http://www.ast.cam.ac.uk/~anj/gemini/hardware.ps.Z
ftp://ftp.ast.cam.ac.uk/pub/gemini_RGO/sic/sic_anj_hardware.ps.Z
I can't guarantee 100% that they are all accurate, but I think they should be
correct.
- Andrew
O o ._ Andrew Johnson, Royal Greenwich Observatory
__\\_ Madingley Road, Cambridge, CB3 0EZ
__|ooooo|__ Tel +44 (0)1223 374823 Fax 374700
~~\_________/~~ WWW http://www.ast.cam.ac.uk/~anj/
- Navigate by Date:
- Prev:
Re: Recommended setting for XyCom 566 Analog input module? Ned Arnold
- Next:
More on building Epics on Solaris Nick Rees
- Index:
1994
<1995>
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Recommended setting for XyCom 566 Analog input module? Ned Arnold
- Next:
Re: Recommended setting for XyCom 566 Analog input module? 415
- Index:
1994
<1995>
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024