Experimental Physics and Industrial Control System
Peregrine,
Just a warning...Marty Kramer and I have recently found problems in the
HiDEOS Octal UART driver that show up when two or more ports are being
driven(very hard), simultaneously. If your driver has not been tested
under these circumstances it may have inherited these problems.
Let me know if you want specifics.
> The driver is based on the HiDEOS support for the SCC2698 Octal UART which
> does support RS-232, RS-422 and RS-485 although only the RS-232 code has
> really been tested. It is written as a standard VxWorks ty driver so it can
> be used with the drvSerial framework. It also uses the drvIpac carrier
> board driver from Andrew Johnson at RGO.
-Joe
----------------------------------------------------------------------
Joseph Sullivan Phone: (630) 252-8657
Experimental Facilities Division Email: [email protected]
Argonne National Laboratory Fax: (630) 252-9303
9700 S. Cass Ave. Bldg. 401
Argonne, IL 60439-4844
- Navigate by Date:
- Prev:
Re: Proposal for boosted Symb device support Marty Kraimer
- Next:
Re: Greenspring rs422 support Joseph P. Sullivan
- Index:
1994
1995
1996
1997
<1998>
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Greenspring rs422 support edmond desmond
- Next:
Re: Greenspring rs422 support Joseph P. Sullivan
- Index:
1994
1995
1996
1997
<1998>
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024