Experimental Physics and Industrial Control System
On Fri, 14 Aug 1998, Ralph Lange wrote:
>
> The only problem could be Raw Soft Support, as there is no address
> information in the INP/OUT fields and SHFT will always be 0. Right?
>
But if SHFT were allowed to be set by GDCT, wouldn't it just be
overwritten by the device support layer in the cases where the device
support sets this field, thus making it work for all cases?
Cheers,
Andy
===================================================================================
Andy Foster
Gemini 8-m Telescopes Project Tel: 1 (808) 974 2556 (direct)
Gemini-North Base Facility Fax: 1 (808) 974 9235
670 North A'ohoku Place
University Park E-mail: [email protected] or
Hilo [email protected]
Hawaii 96720
USA
- Replies:
- Re: MBBI, SHFT, and GDCT Ralph Lange
- References:
- Re: MBBI, SHFT, and GDCT Ralph Lange
- Navigate by Date:
- Prev:
increasing scan rates Geoff Savage
- Next:
RE: increasing scan rates Jeff Hill
- Index:
1994
1995
1996
1997
<1998>
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: MBBI, SHFT, and GDCT Ralph Lange
- Next:
Re: MBBI, SHFT, and GDCT Ralph Lange
- Index:
1994
1995
1996
1997
<1998>
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024