Experimental Physics and Industrial Control System
> > The only problem could be Raw Soft Support, as there is no address
> > information in the INP/OUT fields and SHFT will always be 0. Right?
>
> But if SHFT were allowed to be set by GDCT, wouldn't it just be
> overwritten by the device support layer in the cases where the device
> support sets this field, thus making it work for all cases?
Yup. I neither see any problems with the SHFT value made DCT accessible.
What do you think, Marty?
Another workaround (as SHFT is DB accessible):
Put a couple of dbpf commands at the end of the startup.command script
(after iocInit) to set the SHFT fields.
Ralph
- Replies:
- Re: MBBI, SHFT, and GDCT Marty Kraimer
- References:
- Re: MBBI, SHFT, and GDCT Andy Foster
- Navigate by Date:
- Prev:
ADL file formats Peregrine McGehee
- Next:
Re: MBBI, SHFT, and GDCT Marty Kraimer
- Index:
1994
1995
1996
1997
<1998>
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: MBBI, SHFT, and GDCT Andy Foster
- Next:
Re: MBBI, SHFT, and GDCT Marty Kraimer
- Index:
1994
1995
1996
1997
<1998>
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024