| 1994 1995 1996 1997 1998 <1999> 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 | Index | 1994 1995 1996 1997 1998 <1999> 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | Re: CA online: A call to "assert (semTake ... |
| From: | Marty Kraimer <[email protected]> |
| To: | Jeff Hill <[email protected]> |
| Cc: | Coles Sibley <[email protected]>, EPICS-tech-talk <[email protected]> |
| Date: | Mon, 13 Dec 1999 08:32:48 -0600 |
Jeff Hill wrote: > > Hi Coles, > > The symptoms you describe occur when you try to run EPICS R3.13 with the > SENS IP kernel which is option with vxWorks 5.3 and I suspect mandatory > with vxWorks 5.4. You can avoid this problem by choosing to _not_ install > SENs when you install vxWorks 5.3. The API used to query the broadcast > addresses used for each network interface card changes when using the > SENS IP kernel, and this causes original versions of CA to fail miserably. > I have installed a workaround for this problem into 3.14 and could back > patch 3.13 if there is a strong desire to use SENS with R3.13. > > Jeff I think it would be a good idea to support SENS on R3.13. Marty Kraimer