EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  <2000>  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  <2000>  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>
Subject: DL-PC board question
From: john sinclair <[email protected]>
To: tech talk <[email protected]>
Date: Thu, 13 Jan 2000 12:12:25 -0500 (EST) 
The DataLink Technologies DL-PC is an ISA board that provides DH+
communication to (as one example) an Allen-Bradley PLC. Does anyone
know if this board runs reliably at 230 Kbaud? When connected to a
PLC 5/20 at this rate, we observe failure within 5 minutes.

Additional info:

  o Cable is short and is properly terminated
  o EPICS version is R3.13.1
  o We are using Jeff Hill's modified serial driver

John Sinclair
[email protected]
Oak Ridge National Lab
865-576-6362   865-574-1268 (fax)
Navigate by Date:
Prev: Re: epics on x86 john sinclair
Next: VxWorks global variable support extension proposal William Lupton
Index: 1994  1995  1996  1997  1998  1999  <2000>  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: epics on x86 john sinclair
Next: RE: DL-PC board question Jeff Hill
Index: 1994  1995  1996  1997  1998  1999  <2000>  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024