| 1994 1995 1996 1997 1998 1999 2000 2001 <2002> 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 <2002> 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 |
| <== Date ==> | <== Thread ==> |
|---|
| From: | "Hammonds, John" <[email protected]> |
| To: | "'[email protected]'" <[email protected]> |
| Date: | Wed, 4 Dec 2002 09:24:55 -0600 |
I have been working with a transition between R3.13.5 and 3.13.7. I finally got through problems with connecting with Channel Access with the help of Jeff and Janet. Yesterday I tried to boot a crate with an MV2304 board and find that I cannot load iocCore. This does work with the MV167 and MV172. Errors are shown below. I am using Tornado 2.02 on Solaris 7 to compile everything. This does work if I drop back to 3.13.5 with everything else the same. Any suggestions?
John Hammonds
Intense Pulsed Neutron Source
Argonne National Laboratory
cd appbin
value = 0 = 0x0
ld < iocCore
Relocation value does not fit in 24 bits.
Relocation value does not fit in 24 bits.
Relocation value does not fit in 24 bits.
Relocation value does not fit in 24 bits.
Relocation value does not fit in 24 bits.
Relocation value does not fit in 24 bits.
Relocation value does not fit in 24 bits.
Relocation value does not fit in 24 bits.
Relocation value does not fit in 24 bits.
Relocation value does not fit in 24 bits.
Relocation value does not fit in 24 bits.
Relocation value does not fit in 24 bits.
Relocation value does not fit in 24 bits.
Relocation value does not fit in 24 bits.
Relocation value does not fit in 24 bits.
Relocation value does not fit in 24 bits.
Re