I have been working with a transition between R3.13.5 and 3.13.7. I
finally got through problems with connecting with Channel Access with
the help of Jeff and Janet. Yesterday I tried to boot a crate with an
MV2304 board and find that I cannot load iocCore. This does work with
the MV167 and MV172. Errors are shown below. I am using Tornado 2.02
on Solaris 7 to compile everything. This does work if I drop back to
3.13.5 with everything else the same. Any suggestions?
John Hammonds
Intense Pulsed Neutron Source
Argonne National Laboratory
cd
appbin
value = 0 =
0x0
ld <
iocCore
Relocation value does not fit in 24
bits.
Relocation value does not fit in 24
bits.
Relocation value does not fit in 24
bits.
Relocation value does not fit in 24
bits.
Relocation value does not fit in 24
bits.
Relocation value does not fit in 24
bits.
Relocation value does not fit in 24
bits.
Relocation value does not fit in 24
bits.
Relocation value does not fit in 24
bits.
Relocation value does not fit in 24
bits.
Relocation value does not fit in 24
bits.
Relocation value does not fit in 24
bits.
Relocation value does not fit in 24
bits.
Relocation value does not fit in 24
bits.
Relocation value does not fit in 24
bits.
Relocation value does not fit in 24
bits.
Re