EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  <20032004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  <20032004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019 
<== Date ==> <== Thread ==>

Subject: Re: Long expressions using MAX and MIN in CALC fields
From: Tim Mooney <mooney@aps.anl.gov>
To: "Redman, Russell O." <Russell.Redman@nrc-cnrc.gc.ca>
Cc: "Tech-Talk (E-mail)" <tech-talk@aps.anl.gov>
Date: Thu, 06 Mar 2003 16:14:46 -0600
Russell,

I have new versions of postfix and calcPerform, which implement the
<? and >? operators, and which allow two or more (up to 20) arguments
to min() and max() functions.  I've tested only under R3.13.5 on an
MV162.  Here's the tar file:

http://www.aps.anl.gov/xfd/SoftDist/swBCDA/postfix_R3.13.5.tar.gz

-- 
Tim Mooney (mooney@aps.anl.gov; 630-252-5417)
Advanced Photon Source
APS Operations Division
Beamline Controls & Data Acquisition Group

Replies:
Re: Long expressions using MAX and MIN in CALC fields Dirk Zimoch
References:
Long expressions using MAX and MIN in CALC fields Redman, Russell O.

Navigate by Date:
Prev: Re: converting from R3.13.0Beta12 to R3.13.8 Nick Rees
Next: Update of cross compilers for Linux released David H. Thompson
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  <20032004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019 
Navigate by Thread:
Prev: Re: Long expressions using MAX and MIN in CALC fields Tim Mooney
Next: Re: Long expressions using MAX and MIN in CALC fields Dirk Zimoch
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  <20032004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019