EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  <20032004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  <20032004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: RADNET
From: "Sibley III, Coles" <[email protected]>
To: [email protected]
Date: Tue, 28 Oct 2003 17:21:03 -0500

Hello,

Has anyone looked at radnet or the radnet protocol for interfacing with EPICS?

 

http://www.drambuie.lanl.gov/~radnet

or

http://www.nn-site.com/radnet..html

 

We are looking at some instruments for our target building where monitoring is required but does not necessarily integrate into the Personnel Protection System.

 

Thanks, Coles Sibley

SNS Controls

 

 


Navigate by Date:
Prev: RE: EPICS PV aliases? (rather long-winded) Jeff Hill
Next: flash bootrom failure Geoff Savage
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  <20032004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Re: Command "seq" not found when running example ioc application Marty Kraimer
Next: flash bootrom failure Geoff Savage
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  <20032004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024