Hi Wayne,
I'm not sure if anyone has developed device support for PCI Delta Tau.
However, at Diamond we are using the Turbo PMAC2-VME Ultralite, using
standard VME crates and EPICS 3.13.9. Ron Sluiter (from APS) wrote the
device and driver support for the motor record - which is our primary
interface to the PMAC. We are also going to be using binary in/out and
analogue in/out to communicate additional information to the PMAC for
complex motions.
Dr Martin Norbury
Software Engineer Beamline Systems
Diamond Light Source Ltd.
Rutherford Appleton Laboratory
Chilton, Didcot.
Oxon
OX11 0QX
Tel: 44 (0) 1235 778235
Email: [email protected]
-----Original Message-----
From: [email protected]
[mailto:[email protected]] Sent: 01 February 2005 05:51
To: [email protected]
Subject: DeltaTau PCI Motor Control Boards and Linux
Hi,
We are looking at using the PCI version of the Delta Tau motor
control boards on the beamlines at the Australian Synchrotron
Project. The likely board at this stage is the Turbo PMAC2 Ultralite
PCI. Our standard IOCs are Linux based PCs, running EPICS 3.14.6.
I was wondering if anyone has done any work on developing EPICS
device support for any of the PCI Delta Tau boards under Linux?
Thanks,
Wayne Lewis
Australian Synchrotron Project
Department of Infrastructure
Level 17, 80 Collins Street
Melbourne VIC 3000
tel: +613 9665 9561
fax: +613 9655 8666
web: www.synchrotron.vic.gov.au
**********************************************************************
Any personal or sensitive information contained in this email and
attachments must be handled in accordance with the Victorian
Information Privacy Act 2000, the Health Records Act 2001 or the
Privacy Act 1988 (Commonwealth), as applicable.
This email, including all attachments, is confidential. If you are
not the intended recipient, you must not disclose, distribute, copy
or use the information contained in this email or attachments. Any
confidentiality or privilege is not waived or lost because this
email has been sent to you in error. If you have received it in
error, please let us know by reply email, delete it from your system
and destroy any copies.
**********************************************************************