Experimental Physics and Industrial Control System
Dear All,
The collected responses to my inquiry regarding which version of EPICS
facilities use can be found at:
http://www.lns.cornell.edu/~jad/epics/Epics_Versions.html
Ned Arnold has agreed to incorporate this into the EPICS web site so
expect a relocation at some point.
I am still happy to accept submissions or corrections.
Many thanks to all who took the time to contribute.
John Dobbins
-------- Original Message --------
Subject: Who is using what EPICS version
Date: Mon, 07 Mar 2005 11:58:38 -0500
From: John Dobbins <[email protected]>
To: [email protected]
Dear All,
In March of 2000 Markus Janousch of SLS posted a message to Tech-Talk
inquiring what version of EPICS facilities were currently using. He
summarized the results at:
http://www.sls.psi.ch/controls/software/epics_versions.html
At Cornell we are in the beginning stages of deploying EPICS and as the
posted information is now dated I would like to ask this question again.
I would be happy to summarize and post the results as Markus did. If
you could respond with the following info. it would be greatly appreciated.
Site:
Project:
(Operational)EPICS Version:
Host OS and Version:
Target OS and Version:
Target Processor:
Field Buses:
Comments:
Thanks,
John Dobbins
Research Support Specialist
Laboratory of Elementary Particle Physics
Cornell University
- Navigate by Date:
- Prev:
Re: Who is using what EPICS version Ralph Lange
- Next:
Re: dbpf before iocInit... Emmanuel Mayssat
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
<2005>
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
- Navigate by Thread:
- Prev:
Re: dbpf before iocInit... Benjamin Franksen
- Next:
error building base 3.14.7 w/ cygwin 1.5.13-1 Dale L. Brewe
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
<2005>
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025