1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 <2005> 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 <2005> 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | The later four ports of IP-Octal-232 could not work. |
From: | "ligang" <[email protected]> |
To: | <[email protected]> |
Date: | Mon, 28 Mar 2005 17:49:03 +0800 |
Hi Everyone;
I am using the IP-Octal 232 and VIPC616
carrier board, with drvAscii/drvSerial/tyGSOctal. There are four slots(A
,B ,C ,D ) in one VIPC616 and eight ports(a ,b ,c ,d ,e ,f ,g
,h ) in each IP-Octal 232. The communication is ok between IP-Octal 232
and other devices, when the IP-Octal 232 is put into slot A, or slot B ,or slot
C of VIPC616. When the IP-Octal 232 is put into slot D of
the VIPC616, The later ports(e ,f ,g ,h ) of the IP-Octal
232 doesn't work again, however,the first four ports(a ,b ,c ,d
) of IP-Octal 232 work well. I have exchange several
IP-Octal 232 and VIPC616 respectively, the same errors will occur
again.
Is anybody could do help me? any adivce ia
appreciated! Thanks in advance.
Li,Gang
Accelerator Control Group,
Accelerator Research Center Institute of High Energy Physics (IHEP) P.O. Box 918-10 Beijing, 100049 P.R. China |