EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  <2005>  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  2025  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  <2005>  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  2025 
<== Date ==> <== Thread ==>
Subject: Re: calcout ODLY field
From: Gasper Jansa <[email protected]>
To: Geoff Savage <[email protected]>
Cc: [email protected]
Date: Fri, 01 Apr 2005 08:00:37 +0200
Geoff Savage wrote:

Hi,

I'm trying to delay the output of a calcout record using EPICS 3.14.6, vxworks 5.5.1. When I set the ODLY field to 1.0 there does not appear to be any delay. When I set the ODLY field to 10.0 I get this message on the console - "callbackRequest called with invalid priority". Would someone please be kind enough to send me an example?

Thanks, Geoff





Hi
There was a bug in 3.14.6. Check the
http://www.aps.anl.gov/epics/base/R3-14/6-docs/KnownProblems.html

Regards
Gasper

References:
calcout ODLY field Geoff Savage
Navigate by Date:
Prev: steppermotor vs. motor record compatibility John Spring
Next: [Fwd: FW: ICALEPCS2005 - Request for Abstract Submission] Matthias Clausen
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  <2005>  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  2025 
Navigate by Thread:
Prev: Re: calcout ODLY field Benjamin Franksen
Next: steppermotor vs. motor record compatibility John Spring
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  <2005>  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  2025