EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  <2005>  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  2025  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  <2005>  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  2025 
<== Date ==> <== Thread ==>
Subject: Re: VxStats
From: Carl Lionberger <[email protected]>
To: [email protected]
Date: Fri, 13 May 2005 10:54:37 -0700
A later version of the SNS vxStats uses the Soft Timestamp device support for the string record that is in 3.14 base, rather than the timestamp record.

Carl


in synApps 5.1 (http://www.aps.anl.gov/aod/bcda/synApps/tar/synApps_5_1.tar.gz). Also,
vxStats uses the timestamp record, which isn't in any 3.14 module I know of, so I stuck a
copy in synApps' std module.

Tim Mooney ([email protected]) (630)963-1860
Beamline Controls & Data Acquisition Group
Advanced Photon Source, Argonne National Lab.



--
Carl Lionberger
Control System Software Engineer
Berkeley National Laboratory (LBNL)
(510)486 7503


References:
VxStats Rees, NP (Nick)
Re: VxStats Tim Mooney
Navigate by Date:
Prev: RE: VxStats Jeff Hill
Next: RE: build base 3.14.7 on Windows XP under cygwin Mark Rivers
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  <2005>  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  2025 
Navigate by Thread:
Prev: Re: VxStats Tim Mooney
Next: RE: VxStats Jeff Hill
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  <2005>  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  2025