EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  <2005>  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  <2005>  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>
Subject: FMB LoCuM-4 current monitor
From: "Gillingham, IJ \(Ian\)" <[email protected]>
To: <[email protected]>
Date: Thu, 20 Oct 2005 08:56:08 +0100 
Hello,

Is anyone aware of any EPICS support for the FMB LoCuM-4 low current
monitor.  We intend to use them with PBPMs.  Thought I would ask before
re-inventing the proverbial wheel.

Regards,

Ian


	Ian Gillingham
	Senior Electronic Systems Engineer
	Diamond Light Source Ltd.
	Rutherford Appleton Laboratory
	Chilton
	Didcot
	Oxfordshire OX11 0QX
	 
	Tel: +44 (0)1235 778129
	Fax: +44 (0)1235 778468
	Email: [email protected]
Replies:
Re: FMB LoCuM-4 current monitor juraj krempasky
Navigate by Date:
Prev: Re: More on fonts and RHEL4 Emmanuel Mayssat
Next: Re: FMB LoCuM-4 current monitor juraj krempasky
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  <2005>  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Re: More on fonts and RHEL4 Thomas Birke
Next: Re: FMB LoCuM-4 current monitor juraj krempasky
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  <2005>  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024