1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 <2005> 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 <2005> 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | MCF8252 processor UART1 and UART2 for RTEMS? |
From: | Kiman Ha <[email protected]> |
To: | "[email protected]" <[email protected]>, "[email protected]" <[email protected]> |
Date: | Fri, 4 Nov 2005 23:40:12 +0900 (KST) |
Hello, Somebody knows how do I accessible to MCF8252 processor UART1 and UART2 under RTEMS? Marty's Asyc modules can initialize dirctly of MCF8252 UART1 and UART2 port? The UART0 is assigned a "dev/consol". I tried open the "dev/tty01", "dev/tty02" using Asyc and simple open() functions but the result were failed. If any one has examples for secondary UART port read/write using Asyc or other, pleas let me know. Thanks, PLS operation and control team Kiman Kiman Ha, PLS Control and PAL-XFEL taskforce team San-31 Hyoja-dong, Pohang, Gyungbuk, 790-784, Korea TEL +82-54-279-1435 [email protected] |