1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 <2006> 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 <2006> 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: NewFocus 8752 |
From: | Joe Sullivan <[email protected]> |
To: | [email protected] |
Cc: | [email protected] |
Date: | Wed, 12 Apr 2006 11:13:55 -0500 |
There is motorRecord (http://www.aps.anl.gov/upd/people/sluiter/epics/motor/index.html) support available for the NewFocus 8750. This is an EPICS 3.14 asyn driver so it can connect thru a serial or TCP/IP ports. I have not tested this driver against the 8752 model yet but I do have plans to do this soon.
-- Joseph Sullivan [email protected] <> 630-252-8657 Advanced Photon Source APS Engineering Support Beamline Controls & Data Acquisition Group
Hi,
I was wondering if somebody has developed EPICS device support for a NewFocus Picomotor Ethernet controller 8752? We would like to talk via tcp/ip and this unit to 6 picomotors, which are attached to it. As an alternative we could also use RS232 communications with the 8752.
Any help would be greatly appreciated.
Thanks and with kind regards,
Max
-- Maximilien J. COLLON
cosine Research BV :: Tel +31 71 528 49 69
Niels Bohrweg 11 :: Fax +31 71 528 49 63
NL-2333 CA Leiden :: Web http://cosine.nl