Hi,
I am running EPICS R3.14.7 on a MVME2700.
I am configuring Canberra's AIM MCA modules. Having issues with
the TCA module.
icbConfig seems to be fine:
icbConfig("icbTca1", 0x98c, 1, 1)
value = 0 = 0x0
dbLoadRecords("$(MCA)/mcaApp/Db/icb_tca.db",
"P=dp3:,TCA=tca1,MCA=aim_adc1,PORT=icbTca1")
value = 0 = 0x0
But I get the following errors:
2006/04/28 11:11:17.728 drvIcbAsyn::drvUserCreate, unknown command=HI1
dp3:tca1SCA1_HI devAsynFloat64::initCommon drvUserCreate
2006/04/28 11:11:17.728 drvIcbAsyn::drvUserCreate, unknown command=LOW1
dp3:tca1SCA1_LOW devAsynFloat64::initCommon drvUserCreate
2006/04/28 11:11:17.728 drvIcbAsyn::drvUserCreate, unknown command=HI2
dp3:tca1SCA2_HI devAsynFloat64::initCommon drvUserCreate
etc...
Any hints on what this might be?