Experimental Physics and Industrial Control System
Bob,
If you just want to read information from the PLC, you can use the FTP
feature of the Siemens S7 series. No hardware or proprietary software
required.
--
Emmanuel
On Fri, 2006-11-10 at 07:15 -0800, Dalesio, Leo `Bob` wrote:
> Is anyone talking to SIemen's PLCs over Profinet from a PC104?
>
> Or talking to Siemen's PLCs using their ethernet protocol?
>
> Thanks,
> bob
- References:
- Siemen's PLC Interfaces Dalesio, Leo `Bob`
- Navigate by Date:
- Prev:
Re: Siemen's PLC Interfaces Dirk Zimoch
- Next:
Re: Siemen's PLC Interfaces Rolf Keitel
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
<2006>
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
- Navigate by Thread:
- Prev:
Re: Siemen's PLC Interfaces Luedeke Andreas
- Next:
Re: Siemen's PLC Interfaces Rolf Keitel
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
<2006>
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025