EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  <20072008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  <20072008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: firewire video on RTEMS-4.6.x-MVME5500
From: Kate Feng <[email protected]>
To: [email protected], [email protected]
Date: Tue, 03 Apr 2007 15:42:42 -0400
Hi,

Here is a sampled performance of firewire video driver on RTEMS-mvme5500
BPS
running RTEMS4.6.x :
http://www.nsls.bnl.gov/facility/expsys/software/EPICS/FW1024x768x8bit.png

The image was sampled at 30 frames/sec of data transfer and simultaneous
6 Hz
of EPICS GUI real-time display.

Higher performance is yet to be exhibited.

Acknowledgement to Steve Singleton and Mark Heron of Diamond Light
Source at U.K. for sending me the EPICS/GUI/edm  display related
software.

Besides, there is a prebuilt binary of RTEMS-mvme5500 at
http://www.nsls.bnl.gov/facility/expsys/software/EPICS
by clicking at "Download the latest prebuilt binary for MVME5500"

Regards,
Kate



Replies:
Re: firewire video on RTEMS-4.6.x-MVME5500 Kate Feng

Navigate by Date:
Prev: RE: OMS MAXv reset/power-up problem Mark Rivers
Next: Using Groups and hierarchal design in VDCT Dave Reid
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  <20072008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Re: sequencer installation Emmanuel Mayssat
Next: Re: firewire video on RTEMS-4.6.x-MVME5500 Kate Feng
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  <20072008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024