Experimental Physics and Industrial Control System
We are working on an
embedded EPICS IOC deployment but are running into some confusion on what is
necessary to build to our target architecture which is ARM running a linux
kernel 2.6.x. We have our own cross-compilers that we would like to
use and build with but we seem to be running into issue with some post-build
executables that need to be run on the target.
Can someone clarify
what EPICS binaries are necessary to be deployed to the target to run as a "Soft
IOC" standalone? Also, can we cross-compile all we need on our host system
yet run fully standalone on the target?
Just to be clear, we
are not running as a slave target to a host computer but as a fully standalone
embedded host IOC.
Any clarification is deeply
appreciated.
David
DeBonis
Principal Software Engineer
ZTEC Instruments, Inc.
Phone: 505-342-0132 x133
Fax: 505-342-0222
- Replies:
- Re: Embedded EPICS IOC Andrew Johnson
- Re: Embedded EPICS IOC Mauro Giacchini
- Navigate by Date:
- Prev:
RE: VxWorks time() Thompson, David H.
- Next:
Re: PV save and restore tool sought Emmanuel Mayssat
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
<2007>
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: "invalid UDP request" during boot Jeff Hill
- Next:
Re: Embedded EPICS IOC Andrew Johnson
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
<2007>
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024