Experimental Physics and Industrial Control System
I'd like to make note of the addition of RTEMS support in the recent
Ipac and Asyn releases a little more explicitly. In particular,
I've used the new code with RTEMS on the following hardware:
CPU modules
MVME2100
MVME6100
IP carrier modules
SBS VIPC-616
Xycom XY9660
IP modules
SBS Octal UART
SBS IP-488 GPIB controller
Acromag IP330 ADC
Acromag IP-OPTOIO-8 digital I/O
Hytec 8413 ADC
Many thanks go out to Andrew Johnson, Mark Rivers and Till Straumann
for all the code that made this possible.
--
Eric Norum <[email protected]>
Advanced Photon Source
Argonne National Laboratory
(630) 252-4793
- References:
- New release of Ipac Andrew Johnson
- Navigate by Date:
- Prev:
Re: Calculating status with invalid/non-existant inputs Tim Mooney
- Next:
Re: Calculating status with invalid/non-existant inputs Emmanuel Mayssat
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
<2007>
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
New release of Ipac Andrew Johnson
- Next:
Automated logbook Emmanuel Mayssat
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
<2007>
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024