Experimental Physics and Industrial Control System
Subject: |
error in communicating to the GPIB device with NI-PCI board |
From: |
zhangdemin99 <[email protected]> |
To: |
tech-talk <[email protected]> |
Date: |
Fri, 18 Jan 2008 18:14:58 +0800 (CST) |
Dear all,
I am trying to communicate the GPIB device with a NI-PCI board.
I have built base-3.14.9,StreamaDevice-2-3,asyn4-7 with LINUX_GPIB=yes
,linux-gpib-3.2.09
and the board driver NI-488.2-beta-2.5.1b0 on the RHEL4.
When I run the application, there are always errors.especially
"Command GpibBoardDriverConfig not found".
[fel@localhost iocPSM6003]$ ../../bin/linux-x86/PSM6003 st.cmd
#!../../bin/linux-x86/PSM6003
## You may have to change PSM6003 to something else
## everywhere it appears in this file
< envPaths
epicsEnvSet(ARCH,"linux-x86")
epicsEnvSet(IOC,"iocPSM6003")
epicsEnvSet(TOP,"/home/fel/psm6003/psm6003")
epicsEnvSet(PSM6003,"/home/fel/psm6003/module/psm6003")
epicsEnvSet(ASYN,"/home/fel/psm6003/asyn4-7")
epicsEnvSet(EPICS_BASE,"/home/fel/psm6003/base")
epicsEnvSet ("STREAM_PROTOCOL_PATH", "../../PSM6003APP/Db:.")
## Register all support components
dbLoadDatabase("../../dbd/PSM6003.dbd",0,0)
PSM6003_registerRecordDeviceDriver(pdbbase)
## Load record instances
dbLoadRecords("../../db/devPSM6003.db","P=PSM6003:,R=,L=0,A=0")
GpibBoardDriverConfig("L0",1,0,3,0)
st.cmd -- Line 15 -- Command GpibBoardDriverConfig not found.
iocInit()
Starting iocInit
############################################################################
## EPICS R3.14.9 $R3-14-9$ $2007/02/05 16:31:45$
## EPICS Base built Jan 17 2008
############################################################################
2008/01/18 17:13:41.457 Businterface 'L0' not found for 'query-current'
2008/01/18 17:13:41.458 query-current: Can't attach to bus L0 0
2008/01/18 17:13:41.458 query-current: Record initialization failed
2008/01/18 17:13:41.458 Businterface 'L0' not found for 'setcurrent'
2008/01/18 17:13:41.458 setcurrent: Can't attach to bus L0 0
2008/01/18 17:13:41.458 setcurrent: Record initialization failed
iocInit: All initialization complete
## Start any sequence programs
#seq sncPSM6003,"user=fel"
The CA server's beacon address list was empty after initialization?
epics>
many thanks in advance
- Replies:
- Re: error in communicating to the GPIB device with NI-PCI board Stefan Heim
- Navigate by Date:
- Prev:
RE: CA connection management problem Owens, PH (Peter)
- Next:
Re: error in communicating to the GPIB device with NI-PCI board Stefan Heim
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
<2008>
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: CA connection management problem Jeff Hill
- Next:
Re: error in communicating to the GPIB device with NI-PCI board Stefan Heim
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
<2008>
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024