I can't address the RTEMS question, but I doubt that the error is
related to the OS.
This error message occurs when the motor driver fails to establish
communication
with the motor controller at boot-up (iocInit). I suggest querying
the EPICS shell with;
dbior "<driver_name>"
where <driver_name> is; e.g., drvOms58, drvMM4000. You may get message
like the following,
> dbior "drvOms58"
Driver: drvOms58
No VME58 controllers configured.
value = 0 = 0x0
Hope this helps,
Ron
John M. Skinner wrote:
We're running several NSLS beamlines with 5.3 motor records under
RTEMS. I got the motor code from Bill Nolan, who might have gotten it
from Kate Feng. We'd like to upgrade our motor records, but I've
tried 6.1 and 6.3 and I get "motor_init_record_com(): card does not
exist!" errors. Is anyone using motor records beyond 5.3 under RTEMS?