Re: latest motor record on RTEMS?

[Ron Sluiter <sluiter@aps.anl.gov>]

I can't address the RTEMS question, but I doubt that the error is 
related to the OS.

This error message occurs when the motor driver fails to establish 
communication
with the motor controller at boot-up (iocInit).  I suggest querying the 
EPICS shell with;

dbior "<driver_name>"

where <driver_name> is; e.g., drvOms58, drvMM4000. You may get message 
like the following,

> dbior "drvOms58"
Driver: drvOms58
   No VME58 controllers configured.
value = 0 = 0x0

Hope this helps,
Ron


John M. Skinner wrote:
> We're running several NSLS beamlines with 5.3 motor records under 
> RTEMS. I got the motor code from Bill Nolan, who might have gotten it 
> from Kate Feng. We'd like to upgrade our motor records, but I've tried 
> 6.1 and 6.3 and I get "motor_init_record_com(): card does not exist!" 
> errors. Is anyone using motor records beyond 5.3 under RTEMS?