EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  <2008>  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  <2008>  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>
Subject: Pulse Train Record
From: "David Dudley" <[email protected]>
To: <[email protected]>
Date: Wed, 25 Jun 2008 20:54:32 -0500 
Is it possible to use a bo for a pulse train output?  I have an
application where I need to pulse a chemical metering pump which
requires a pulse train to control it at between 0-100 pulses per second,
and was wondering if I could use a simple digital output bit to do it,
or if I need some device support as well.

David Dudley
City of Corpus Christi

BEGIN:VCARD
VERSION:2.1
X-GWTYPE:USER
FN:David Dudley
TEL;WORK:880-3740
ORG:;MIS
TEL;PREF;FAX:880-3741
EMAIL;WORK;PREF;NGW:[email protected]
N:Dudley;David
END:VCARD
Replies:
RE: Pulse Train Record Dalesio, Leo
Navigate by Date:
Prev: Question with sscan Record! likun
Next: RE: Pulse Train Record Dalesio, Leo
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  <2008>  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: sscan Record 2.6.1 works very well! likun
Next: RE: Pulse Train Record Dalesio, Leo
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  <2008>  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024