RE: ASYN driver

["Mark Rivers" <rivers@cars.uchicago.edu>]

David,

What asyn driver are you running?  drvAsynSerialPort, drvAsynIPPort, or
some other driver?  Neither the serial or IP port drivers contain that
error message (at least the most recent release, R4-9, does not).

In general you turn off all asyn messages on a port by setting the
asynTraceFlag to 0

asynSetTraceMask "port" addr 0

addr is typically 0, but it could have other values for multi-device
drivers.

Mark


-----Original Message-----
From: tech-talk-bounces@aps.anl.gov
[mailto:tech-talk-bounces@aps.anl.gov] On Behalf Of David Dudley
Sent: Tuesday, August 26, 2008 11:42 AM
To: tech-talk@aps.anl.gov
Subject: ASYN driver

I'm getting messages on the IOC console whenever I'm running the ASYN
driver similar to

"writeRaw: Need to write 8 chars"
"writeRaw: Write to 4  wrote 8 chars"

How do I turn them off?  I've got the debug fields set to zero.

David